Precautions for the safety of ball mills

The ball mill must ensure that safety stops during maintenance, but many unskilled operators may not pay attention to the details of the details. During the shutdown process, the ball mill is scaly all over the body. In order to avoid such situations, 矿 Mine machine summarizes the safety stop precautions of the ball mill. We will share this article.

      Mining machinery ball mill installation, commissioning, maintenance and maintenance team, they have a deep summary of the precautions for the safety stop of the ball mill. The following is the three details of the key.

      ① After the parking preparation is completed, the motor of the ball mill equipment can be stopped. After that, the oil pump is stopped. Pay attention to observing whether the front and back of the ball mill, cylinder, exhaust box, classifier overflow groove and sand return slot are missed or blocked.

      ② Timely adjust the operating conditions of the ball mill according to the changes in the nature of the ore. When the ore in the ball mill is treated, the water is generally stopped within 10 to 12 minutes. When the room temperature is below zero degrees, the bearing set of cooling water should be released to prevent freezing and damage the bearing.

      ③ When the ball mill is stopped, the spiral of the spiral classifier will be increased to stop the grading machine after the sand surface in the graded machine is stopped to prevent the ball mill from being blocked by the sand back sand. If you encounter a sudden power outage, you must stop the mine and water immediately, and cut off the power, and shut down other equipment.